| Stitch Guide Foot (F035N) |
HSF-F035N |
 |
Stitch Guide Foot (F035N)
The scale in the presser foot can be used for perfect topstitching on bothstraight and curved lines. Each divisional mark equals 2 mm.1. Select straight, zigzag, or decorative stitches.2. Sew the stitches keeping a certain seam |
Product Details |
| Adjustable Zipper And Piping Foot (F036N) |
HSF-F036N |
 |
Attaches zippers and pipings easily. Its position can be adjusted exactly on the edge of zipper/piping, avoiding the non-flat parts of zipper/piping, and presses the fabric with just right pressure.1. Screw on the presser foot and select a straight stitch |
Product Details |
| Pin Tuck Foot 5 Groove (F037N) |
HSF-F037N |
 |
This presser foot has 5 grooves and produces perfect pin tucks and corded pin tucks using a twin needle on lightweight fabric. A specially designed bobbin cover is also included with this presser foot.1. Install and manually thread a twin needle.2. Draw a |
Product Details |
| Picot Foot 7mm (F039N) |
HSF-F039N |
 |
Creates shell-looking edges on sheer and very lightweight fabrics.1. Increase upper thread tension.2. Place the fabric with the wrong side facing up under the presser foot.3. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 st |
Product Details |
| Quilting Foot For PE-300S (F040N) |
HSF-F040N |
 |
Spring action foot for darning, quilting or free-motion embroidery. |
Product Details |
| Walking Foot For PE-300S (F041N) |
HSF-F041N |
 |
For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabricsCompatible w |
Product Details |
| Straight Stitch Foot 7mm (F042N) |
HSF-F042N |
 |
For precise straight stitching on thin fabrics or on edges of fabrics. Usethis presser foot only with the center straight stitch. |
Product Details |
| Level Spring Action Guide 2mm - PQ Series (F044) |
HSF-F044 |
 |
These guides are useful for sewing pin tucks and for finishing seams by Topstitching seam allowances folded over to one side. The needle position is 2mm from the right edge.
Compatible with PQ-1300, 1500 and 1500S |
Product Details |
| Level Spring Action Guide 5mm - PQ Series (F045) |
HSF-F045 |
 |
These guides are useful for sewing pin tucks and for finishing seams by topstitching seam allowances folded over to one side. The needle position is 5mm from the right edge.
Compatible with PQ-1300, 1500 and 1500S |
Product Details |
| Level Spring Action Guide 8mm - PQ Series( F046) |
HSF-F046 |
 |
These guides are useful for sewing pin tucks and for finishing seams by topstitching seam allowances folded over to one side. The needle position is 8mm from the right edge.
Compatible with PQ-1300, 1500 and 1500S |
Product Details |
| Gathering Foot - PQ Series (F047) |
HSF-F047 |
 |
This presser foot is useful for making gathers in lace or frills and for easing sleeve caps.
Compatible with PQ-1300, 1500 and 1500S |
Product Details |
| Very Narrow Foot - PQ Series (F048) |
HSF-F048 |
 |
Very convenient for attaching piping, zippers, stitching angled corners ect.
This narrow foot has a good surface to maintain contact with the feed dogs and can slip into very small areas.
Compatible with PQ-1300, 1500 and 1500S |
Product Details |
| Heavy Weight Foot - PQ Series (F049) |
HSF-F049 |
 |
An improved larger foot print assures better contact of the fabric to the feed dogs, aiding in the proper feed on heavy weight materials such as canvas, fake fur and lace.
Compatible with PQ-1300, 1500 and 1500S |
Product Details |
| Walking Foot 5mm (vertical) (F050) |
HSF-F050 |
 |
For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabrics |
Product Details |
| Ruffler Foot (7mm) (F051) |
HSF-F051 |
 |
Makes ruffles with evenly spaced tucks and gathers. When the ruffling blade on the upper portion of the presser foot is moved forward, its teeth catch the fabric and force it forward into gathers or tucks. The interval of tucks can be adjusted. |
Product Details |
