| Quilting Piecing Foot (F001N) |
HSF-F001N |
 |
Best for quilt and patchwork piecing with 1/4” or 1/8’’ seam allowance. Its back and small needle opening are designed to give the right pressure on fabrics.1. Snap on the presser foot and select a center straight stitch.2. With right sides together place |
Product Details |
| Narrow Hemmer Foot 7mm (F002N) |
HSF-F002N |
 |
Designed to create a flat narrow hem on lightweight fabrics.1. Place the fabric with the wrong side facing up under the presser foot.2. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.3. Raise the needle and the pres |
Product Details |
| Narrow Hemmer Foot 5mm (F003N) |
HSF-F003N |
 |
Designed to create a flat narrow hem on lightweight fabrics.1. Place the fabric with the wrong side facing up under the presser foot.2. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.3. Raise the needle and the pres |
Product Details |
| Concealed Zipper Foot (F004N) |
HSF-F004N |
 |
Allows you to install concealed zippers easily.1. Press iron-on interfacing tape to the seam allowance where the zipper will be placed.2. Baste the seam closed and press.3. Baste the zipper along the seam allowance.4. Close the zipper and baste along the |
Product Details |
| Quilting Foot (F005N) |
HSF-F005N |
 |
For darning, quilting, or free-motion. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created.1. Lower the feed dogs.2. Set the machine for straight stitch.3. Place th |
Product Details |
| Teflon Non Stick Foot Horizontal (F007N) |
HSF-F007N |
 |
Designed for consistent feeding with fabrics such as leather, vinyl andother novelty fabrics. |
Product Details |
| Teflon Non Stick Foot Vertical (F008N |
HSF-F008N |
 |
Designed for consistent feeding with fabrics such as leather, vinyl andother novelty fabrics. |
Product Details |
| Adapter For Low Shank Attachment (F009N) |
HSF-F009N |
 |
Attaching this adapter onto the presser foot shaft lets you use optional feet on a low shank.1. Remove Presser Foot Holder.2. Attach Adapter with Low Shank on Presser Foot Shaft with the screw.3. Attach the presser foot shaft.Compatible with Super Galaxie |
Product Details |
| Adapterh For Low Shank Attachment S (F010N) |
HSF-F010N |
 |
Attaching this adapter onto the presser foot shaft lets you use optional feet on a low shank.1. Remove Presser Foot Holder.2. Attach Adapter with Low Shank on Presser Foot Shaft with the screw.3. Attach the presser foot shaft. |
Product Details |
| Straight Stitch Foot (F011N) |
HSF-F011N |
 |
For precise straight stitching on thin fabrics or on edges of fabrics. Usethis presser foot only with the center straight stitch. |
Product Details |
| Gathering Foot (F012N) |
HSF-F012N |
 |
Gathering Foot (F012N)
Used for gathering fabrics. Ideal for clothing as well as home decor.Works best on thin to medium weight fabrics.For gathering:1. Select a straight stitch, left needle position.2. Increase the upper thread tension.3. Place the fabr |
Product Details |
| Cording Foot (F013N) |
HSF-F013N |
 |
Used for embellishing 1 to 3 cords or decorative threads. Perfect for couching!1. Slip a cord from the right of the presser foot, and place each cord into each guide (to use single cord, use the center guide).2. Place cord under the presser foot, and sele |
Product Details |
| Binder Foot (F014N) |
HSF-F014N |
 |
Attaches bias tape with widths less than 7 mm (1/4 inch) using straight, zigzag or decorative stitches.1. Before attaching the presser foot, insert the bias tape into the funnel guide to match thetape edge to the guide side.2. Pull the tape from the rear |
Product Details |
| Overlock Foot Vertical (F015N) |
HSF-F015N |
 |
For vertical bobbin machines only.Sews overcast seams to protect edges from fraying.1. Select an overlock stitch.2. Attach the presser foot.3. Lower the presser foot so that the foot guide is exactly against the edge of the fabric.4. Sew along the guide. |
Product Details |
| Quilting Bar For Walking Foot (F016N) |
HSF-F016N |
 |
Use it to sew parallel rows at preset even intervals. The distance between the straight bar and the needle can be adjusted by sliding the guide.1. Stitch the first straight row.2. Insert the straight bar into the hole of the presser foot holder, or a moun |
Product Details |
| Blind Stitch Foot Horizontal (F017N) |
HSF-F017N |
 |
Creates blind hems on a variety of fabrics, using the adjustable guideon this presser foot. Works well for edge stitching, attaching lace, andfabric edge joining. This is great for both embellishing and utility use.Blind hem:1. Fold the fabric up to creat |
Product Details |
| Blind Stitch Foot Vertical (F018N) |
HSF-F018N |
 |
Creates blind hems on a variety of fabrics, using the adjustable guideon this presser foot. Works well for edge stitching, attaching lace, andfabric edge joining. This is great for both embellishing and utility use.Blind hem:1. Fold the fabric up to creat |
Product Details |
| 5-Hole Cording Foot 7mm (F019N) |
HSF-F019N |
 |
Used for embellishing 1 to 5 cords or decorative threads. It can be used with brother sewing machines of 7 mm feed width.1. Insert cords or threads into each hole on the presser foot.2. Attach the presser foot and pull cords under the presser foot.3. Line |
Product Details |
| 7-Hole Cording Foot 7mm (F020N) |
HSF-F020N |
 |
Used for embellishing 1 to 7 cords or decorative threads.It can be used with brother sewing machines of 7 mm feed width.1. Insert cords or threads into each hole on the presser foot.2. Attach the presser foot and pull cords under the presser foot.3. Line |
Product Details |
| Braiding Foot (F021N) |
HSF-F021N |
 |
Attaches up to 3/16 inch (5 mm) wide braids, ribbons, tapes, cords, etc.1. Loosen the screw on the presser foot and insert a braid through the guide before attaching the presser foot on the machine.2. Slide the plate of the guide back and forth to fit the |
Product Details |
